Alfa Kind is a fast growing construction chemicals organization with experienced management backed by ultra modern manufacturing facilities with fuly automatic online operation and a wide range of construction chemical products.
Anti cracking, non shrinking Tile Grout that withstands heavy traffic.
Excellent water, fungal and chemical resistance.
Easy to clean and stain free.
Increased adhesion and reduced chalking.
Area of applications include
filling tile joints in Terrace Balconies, Kitchen, Pubs,
Food Plants, Restaurants, Hospitals, Chemical Labs,
Swimming Pools, Toilets etc
.png)
.png)
Using a hard rubber squeeze/ grout floater, press the grout firmly into the joints. Hold the float at a 90° angle and pull it at a 45° angle diagonally across the joints and tile to avoid pulling out the material. Work in small areas to have better control on removing the excess grout from joints and surface by moving the squeeze diagonally to the grout lines. Ensure that joint is filled completely, and grout is not just sitting on top
Clean off the surplus grout from tile joints and tiles within 30-45 minutes/ before the product dries. Initially use a rough textured sponge dampened with water to remove the grout residue. Use the damp sponge in a circular motion and keep it relative to the tile surface to achieve the flush joint & taking care not to drag grout from the joints. Clean off any light residue of tile grout left on the tile surface using an alkaline detergent/ Roff tile cleaner without disturbing the joint finish. Tools and containers should be cleaned using clean water when the grout is still fresh.
Spread mixed material over the surface using a notch trowel. Tiles should be placed within the open time of the material. Due to the slip resistance properties of the material, tiles can be fixed vertically. Press firmly the tiles to ensure a good adhesion and remove surplus material from the face of the tiles immediately
